FEATURES AND BENEFITS
MERSORB® mercury adsorbent pellets, provide:
• High Capacity = Long Life
• High Surface Area = Mercury Removal Efficiency of 99.9 to 99.99+%
• Low Pressure Drop = Pellets are available in 1mm, 1.5mm, 3mm, & 4mm diameters to provide high mercury
removal efficiency at a low pressure drop for your application!
MANUFACTURING + QUALITY ASSURANCE
MERSORB® mercury adsorbents
NUCON International, Inc. (NUCON®), manufactures MERSORB® mercury adsorbents in Columbus, OHIO, USA.
ASME NQA-1 is the Quality Assurance standard that NUCON adheres to, as verified by audits performed every 2 years by the Nuclear Procurement Issues Committee (NUPIC ).
The U.S. Nuclear Regulatory Commission staff did a comparison of the Quality Standards of ASME NQA-1 & ISO 9001-2000, and concluded that NQA-1 better meets the Quality Assurance needs of the nuclear power industry. NUCON uses NQA-1 as its QA standard, unlike the other mercury adsorbent manufacturers, which all use ISO standards.
Providing Solutions to remove mercury for emission control, corrosion prevention and catalyst protection.
Selective Adsorption Associates, Inc. (SAA) offers over 40 years of experience in Process Engineering of Adsorption Systems for Gas and Liquid Drying, Sulfur Compound Removal, Emission Control, and over 20 years of Process Design experience in Mercury Removal Systems.
CAUTION: Wet activated carbon removes oxygen from air. Thus, an asphyxiation hazard exists inside enclosed spaces containing activated carbon. Use appropriate safety precautions when entering vessels or other enclosed spaces containing activated carbon. Exposure to strong acids and oxidizers can cause formation of toxic H2S gas.
MERSORB® is a trademark of Nucon International, Inc. (NUCON®) for impregnated activated carbons used to remove mercury from gases and liquids. NUSORB® is a trademark of NUCON for its activated carbons. Information presented herein is believed to be accurate and reliable but does not provide any guarantee or warrantee by NUCON® or by Selective Adsorption Associates, Inc. Nothing herein shall be construed as an invitation to use processes covered by patents without proper arrangements with individuals or companies owning those patents.
AntiMercure® is a Registered Trademark of Selective Adsorption Associates, Inc. (SAA) for its Process for removing mercury from water; AntiMercure™ is a trademark of SAA for its pre-Engineered Systems for removing mercury from water. All Rights Reserved.